Specific setup instructions

Before playing with real hardware, you may need to run some manual setup. Depending on your hardware the steps may be different. This section maintains instructions for the supported gateways

088328 USB/Zigbee dongle

driver

This dongle embeds a CP2102 USB to UART transceiver. This driver is included in latest Linux kernels. For Windows users, install the driver first:

• for Windows 32 bits
• for Windows 64 bits

configuration

• Open or create a Zigbee network on a device (NETW led blinking)
• Press the button on the 088328 USB key (NETW led should start blinking slowly)
• Press the NETW button on the device which has open the network
• All the NETW leds should turn off excepted the one of the device which created the network

Note

For gateways relying on a serial line drive (such as 088328), you can list the available ports of your system by running: python -m serial.tools.list_ports